iPECS iPECS-LIK Скачать руководство пользователя страница 349

Страница: 349 / 447

iPECS-LIK
Feature Description & Operation Manual

Issue 6.0d1

336

5.15 INTERCOM SIGNALING MODE

Description

Each iPECS Phone can select the signaling mode used for incoming ICM calls while the station
is idle. There are three signaling modes available.

H - Call announcing with Handsfree answerback:

When an ICM call is rec

eived, the user receives splash tone followed by the ICM caller’s voice.

The user may respond to the caller without the need to “Lift the handset” or “press the

[SPEAKER]

button”.

P - Call announcing with Privacy:

When an ICM call is received, the user rec

eives splash tone followed by the ICM caller’s voice.

To respond the user must lift the handset or press the

[SPEAKER]

button.

T - Tone ringing:

An ICM call will cause the iPECS Phone to provide audible ICM ring tone. The user must lift the
handset or press

[SPEAKER]

to answer. An SLT always functions in the Tone ring mode.

Operation

iPECS Phone

To change ICM Signaling Mode

1. Press

[PGM]

button, the

[SPEAKER]

button LED lights steady.

Dial Station User Program code “13”, confirmation tone is received.

3. Dial th

e desired ICM Signaling Mode code (“1” for H, “2” for T or “3” for P).

4. Press the

[SAVE]

button.

Conditions

1. Message Wait, Callback, Call Forward and Attendant Override will ring in the tone

mode, regardless of ICM Signaling Mode selected by the user.

2. The ICM signaling Mode Selection does not affect Page announcements.

3. The default ICM Signaling mode is Tone ring and the active mode is stored in

battery-protected memory.

Programming

Related Features



Intercom Call (ICM Call)



Paging



Message Wait/Call Back



Call Forward



DND Override



Intrusion

Содержание iPECS-LIK
































































































































































































































































































































































































































































Результаты поиска

Содержание iPECS-LIK

Отзывы:

Похожие инструкции для iPECS-LIK

Бренды по названию

Популярные бренды

iPECS iPECS-LIK, Описание функций и эксплуатация

Результаты поиска

Содержание iPECS-LIK

Отзывы:

Похожие инструкции для iPECS-LIK

Бренды по названию

Популярные бренды