IPC B02200769 Скачать руководство пользователя страница 67

Страница: 67 / 186

Tap the

Get CLI

button to display information for the caller, even if the line button is not set to display

CLI information.

The caller’s name or phone number is displayed, according to the CLI display preferences.

For more information, see

Call Handling

on page 164.

For an active or ringing call, tap the

Get CLI

button.

If caller information is available, the turret displays full CLI information for the caller in the Call
Notification area of the footer.

4.12.3

Toggle CLI display

Use a preprogrammed

Toggle CLI

button to control whether the name or number of the caller for

incoming calls is displayed on the turret.

This feature can be programmed at the turret by users with sufficient privileges, or it can be programmed
through the Unigy Management System.

When a call is received, the turret displays calling party information in the Call Notification area of the
footer.

Note

If CLI Toggle is applied when both handsets are in use, the CLI Toggle remains in effect until

both

handsets are released.

To change the display for incoming calls, tap the

Toggle CLI

button.

The CLI display for the incoming extension switches from the current default setting (name or phone
number) to the alternative option: from name to number, or from number to name.

4.12.4

Suppress outgoing CLI information

Use a preprogrammed

Suppress CLI

button, before placing or answering a call, to suppress display of

the calling party identification at the far end.

Tap the Suppress CLI button before a call.

CLI information for an active call cannot be suppressed, because the information is sent when the call is
established.

This feature can be programmed at the turret by users with sufficient privileges, or it can be programmed
through the Unigy Management System.

Note

CLI suppression ends after each call. To suppress CLI information for new calls, the feature must be
enabled again.

1. To block calling information for a call you are making, tap the

Suppress CLI

button.

The

Suppress CLI

button is highlighted to indicate that the feature is enabled. The word

Enabled

also displayed on the button.

2. Initiate the call.

No calling identity information appears at the far end. The call shows as Restricted.

4.12: CLI

IPC Proprietary

Unigy 4.3

IQ/MAX TOUCH Turret User Guide

Содержание B02200769


























































































































































































Результаты поиска

Содержание B02200769

Отзывы:

Похожие инструкции для B02200769

Бренды по названию

Популярные бренды

IPC B02200769, Руководство пользователя

Результаты поиска

Содержание B02200769

Отзывы:

Похожие инструкции для B02200769

Бренды по названию

Популярные бренды