IP-Link Installation Guide
10
Operator Interface
Appendix A
Notes on the IP-Link
The IP-Link is functionally the same
as the previous version with a few small differences.
1. There are only two LEDs on the unit indicating a
LINK condition on the Ethernet and Activity on the
same link.
2. The Ethernet Port is now 10/100 capable which
allows greater fl exibility when connecting to an
existing network.
Appendix
3. There is no longer a RCV and SER LED on the unit.
As a result, in order to verify communication between
the CommLink II and the IP-Link, the installer will
have to observe the RLINK LED on the CommLink
II. The LED will be lit but will display a rapid but
faint fl icker if proper communication is established.
Verifi cation of an active address by PING or telnet
procedures stated previously will also prove proper
operation.
