IP-COM In-wall AP Series, Руководство пользователя

Страница: 79 / 106

72
Configure the SNMP Function
1.
Choose SNMP and set SNMP Agent to Enable .
2.
Set related SNMP parameters.
3.
Click Save .
---End
Parameter description
Parameter Description
SNMP Agent
It specifies whether to enable the SNMP agent function of the AP. By default, it is
disabled.
An SNMP manager and the SNMP agent can communicate with each other only if
their SNMP versions are the same. Currently, the SNMP agent function of the AP
supports SNMP V1 and SNMP V2C.
Administrator
It specifies the name of the administrator of the AP. The default name is
Administrator . You can change the name as required.
Device Name
It specifies the device name of the AP. The default device name is the model of the
AP.
It is recommended that you change the AP name so that you can easily identify the
AP when managing the AP using SNMP.
Location
It specifies the location where the AP is used. The default location is ShenZhen .
You can change the location as required.
Read Community
It specifies the read password shared between SNMP managers and this SNMP
agent. The default password is
public .
The SNMP agent function of the AP allows an SNMP manager to use the password
to read variables in the MIB of the AP.