IP-COM In-wall AP Series, Руководство пользователя

Страница: 28 / 106

21
Parameter Description
Ethernet Mode
It specifies the Ethernet mode of the PoE power-supply port (the rear port of
W36AP) of this AP.
−
Auto Negotiation : This mode features a high transmission rate but short
transmission distance. Generally, this mode is recommended.
−
10 Mbps Half Duplex : This mode features a long transmission distance but
relatively low transmission rate (usually 10 Mbps).
The 10 Mbps Half Duplex mode is recommended only if the Ethernet
cable that connects the PoE power-supply port of the AP to a peer device
exceeds 100 meters. In this case, the connected LAN port of the peer
device must work in auto-negotiation mode. Otherwise, the PoE
power-supply port of the AP may not be able to properly transmit or
receive data.
Modifications to Ethernet Mode take effect after you reset the AP or
-
unplug from and plug into the port again.