PURIST
OPERATING INSTRUCTIONS
Preparing the Product for Use
SUP_7.036_Rev01
34 (80)
4.3.4.
Fit the boot holder to the traction rail
Fig. 4-27:
Traction rail interface
block
1
Interface block
The traction slider block with the interface block (1) is located on
the traction rail.
Fig. 4-28:
Boot holder
1
Boot holder
2
Handle
3
Tilting bearing
4
Guide pin
The boot holder (1) is fitted with a tilting bearing (3) that attaches
to the interface block.
Note that the guide pin is led into the corresponding guide
groove in the interface block.
Fig. 4-29:
Interface block
1
Traction slider block
2
Interface block
3
Guide groove
The guide groove for receiving the guide pin is located in the
interface block (2).
1
2
3
1
2
4
1
3
