background image

2. GENERAL INFORMATION

2.1. SAFETY INFORMATION

Please read the following before handling this product.

1. Do not drop the product, submit it to impact, or pierce it.

2. The circuit boards within this product are susceptible to static electricity. Proper grounding is strongly

recommended to prevent electrical damage to the product or other connected devices, including the
computer host.

3. Avoid placing this product close to magnetic devices, high voltage devices, or in an area exposed to

heat, flame, direct sunlight, dampness, moisture, rain, vibration, shock, dust, or sand.

4. To avoid overheating, this product should be operated in a well-ventilated area.

5. Before starting any type of hardware installation, ensure that all power switches have been turned off

and all power cords have been disconnected to prevent personal injury and damage to the hardware.

2.2. PACKAGE CONTENTS

Check the package contents to verify that you have received the items below. Please contact ioSafe if any
items are missing or damaged (see 

Section 8.4: Contact ioSafe Support, page 25

).

ioSafe 1520+

Qty. 1

ioSafe 1520+ User Manual

5

Содержание 1520+





























Отзывы: