ioSafe 1520+, Руководство пользователя

Страница: 16 / 28

7. Replace the bottom cover and secure it in place using the screw you removed in Step 3.
8. Turn the ioSafe 1520+ back over and reconnect the cables you removed in Step 1 (see Section 3.5:
Connecting the ioSafe 1520+, page 16 ).
9. If you haven’t already, install Synology DiskStation Manager (DSM) (see Install Synology DiskStation
Manager ).
10. Log into DSM as an administrator (see Connect to Synology DiskStation Manager ).
11. Go to Control Panel > Info Center and check Total Physical Memory to verify that the correct
amount of RAM memory is installed.
NOTE
If your ioSafe 1520+ does not recognize the memory or fails to start up, please make sure
that each memory module is correctly seated in its memory slot.
3.5. CONNECTING THE IOSAFE 1520+
WARNING
Do not place the ioSafe 1520+ device on a soft surface, such as carpet, that will obstruct
air flow into the vents on the underside of the product.
ioSafe 1520+ User Manual 16