ioSafe 1520+, Руководство пользователя

Страница: 23 / 28

7. REPLACE SYSTEM FANS
The ioSafe 1520+ will play beep sounds if either of the system fans is not working. Follow the steps below
to replace the malfunctioning fans with a good set.
1. Shut down your ioSafe 1520+. Disconnect all cables connected to your ioSafe 1520+ to prevent
possible damage.
2. Remove the seven (7) perimeter screws around the rear fan assembly plate.
3. Pull the assembly from the back panel of your ioSafe 1520+ to expose the fan connections.
4. Disconnect the fan cables from the connector wires attached to the rest of the ioSafe 1520+ and then
remove the assembly.
5. Install the new fan assembly or replace the existing fans. Connect the fan cables of the new fans to the
fan connector wires attached to the main ioSafe unit.
6. Replace and tighten the seven (7) screws you removed in Step 2.
ioSafe 1520+ User Manual 23