©Copyright 2009 IonWays, LLC VS.1
Page 4
REMINERALIZER CARTRIDGE
The water experts at IonWays have created systems and products to take advantage of the best of R/O –
contaminant free water – by installing our remineralizer as a pre-filter before the ionizer. To make it possible to
ionize “pure” water (natural or man-made), IonWays has perfected the Remineralization Technology to add a
healthy blend of bicarbonates and organic forms of calcium, magnesium and other trace elements to the water
before ionization. Our unique remineralizer is a proprietary blend of organic and inorganic minerals that also
provides over 70 trace elements. A partial list of minerals/trace elements in the organic mineral source are:
Beryllium
Calcium
Carbon
Cerium
Cesium
Germanium
Holmium
Magnesium
Molybdenum
Neodymium
Niobium
Osmium
Palladium
Potassium
Praseodymium
Rhenium
Rhodium
Rubidium
Ruthenium
Samarium
Scandium
Sodium
Strontium
Tantalum
Tellurium
Terbium
Thallium
Vanadium
Yttrium
Zirconium
Fitting Installation Instructions
Many of the connections needed on your IonWays R/O system are quick connect. Inserting and removing the
tubing is simple to do if the following instructions are followed:
MAKE A CLEAN TUBE CUT
Cut the tube squarely and if using plastic tubing, ensure that making the cut has not flattened the tube. It needs to
be round and cut squarely. Also ensure that the tube has a smooth outside diameter without any burrs or score
marks prior to inserting it into the fitting.
INSERT TUBE INTO FITTING
Push the tubing through the collar and dual o-rings until it bottoms out against the tube stop.
TEST AND INSPECT
Push and pull the tubing toward and away from the fitting to ensure that it has been installed properly (tug it to test
the connection). Test and inspect the installation for any leaks.