Wiegand Setup
In the initial interface, press
[M/OK]
>
COMM.
>
Wiegand Setup
to enter the
Wiegand Setup
interface.
6.4.1
Wiegand Input
Wiegand Input connector supports card reader, or connects the device as a master device to
another device (slave device), forming a master/slave system.
Wiegand Format:
User can choose among the following built-in Wiegand formats: Wiegand 26,
Wiegand 26a, Wiegand 34, Wiegand 34a, Wiegand 36, Wiegand 36a, Wiegand 37, Wiegand 37a,
Wiegand 50 and
No using
. The value
no using
means that the format with this bit number is not
used. The following table describes all the formats.
1.
Enable Domain Name:
When the domain
name mode is enabled, you access a website
using a domain name in the format of http://;
otherwise, you must enter an IP address for
website access.
2.
Server Address:
IP address of Webserver
3.
Server port:
Port used by Webserver
4.
Enable Proxy
Server:
When you enable the
proxy function, set the IP address and port
number of the proxy server. This option
indicates whether to use a proxy IP address.
You may choose to enter the proxy IP address
or the server address for Internet access,
whichever you like.
