10
VICTOREM
2KSDI-Mini User's Manual
Typical power consumption for 2KSDI-Mini cameras is shown in Table 5.
Model
Configuration
Typical Power
(12V supply)
2K(M)SDI-Mini
2K/1080P 60Hz, 3G-SDI (
res 2, fps 9
)
0.29A, 3.5W
2K/1080P 30Hz, HD-SDI (
res 2, fps 4
)
0.26A, 3.1W
720P 50 Hz HD-SDI (
res 0, fps 7
)
0.25A, 3.0W
2KSDI-Mini RS
2K/1080P 60Hz, 3G-SDI (
res 2, fps 9
)
0.31A, 3.7W
2K/1080P 30Hz, HD-SDI (
res 2, fps 4
)
0.28A, 3.5W
Table 5. Power consumption
2.3 Lens
A stainless steel C-mount lens adapter ring is used to ensure the proper back focus. The position is
factory calibrated and tested on each camera. Two set screws on the sides (#4-40) firmly hold the ring
in place. The position of the ring can be adjusted, if necessary, use a 0.05” hex key. The amount of
torque on the set screws should not exceed 22.5 ounce inches or deflection in the stainless steel ring
may occur causing issues threading lenses on and off the camera.
An optional C-mount to Active EF-mount adapter is also available. Focus and aperture controls are
fully integrated into the 2KSDI-Mini camera. The lens connector is shown in Figure 3, and the pinout
is shown in Table 6. When using the Active EF-mount adapter the power supply must be 8-16V DC.
Pin
Description
1
NC
2
RS232 RX
3
RS232 TX
4
Power Out (8-16V)
5
GND
Table 6. Lens connector Pinout
IO Industries Inc.
Revision 3.0
Figure 3. Lens Connector
