30
VICTOREM
2KSDI-Mini User's Manual
6.9 Lens View
The Lens control view is shown in Figure 17. This view is
used to control lenses connected to a camera with an EF
lens mount. The Lens control view is not available for “D”
model cameras that support DC Iris lenses.
6.9.1 Aperture
The aperture setting controls the iris in the lens to vary the
amount of light it allows into the camera. An aperture value
of zero corresponds to a fully open aperture. The maximum
number of aperture steps varies from lens to lens.
6.9.2 Focus
The large arrow buttons are used to change the focus
position of the lens. From left to right the button functions
are: move focus to minimum, step focus towards minimum,
step focus towards infinity, and move focus to infinity. The
Step Size adjustment controls how far the lens moves with
each press of the step arrows. The effect of the step size
varies from lens to lens.
6.9.3 Status
Information about the current state of the lens is displayed
in the status area.
6.9.4 Direct Control
The Direct Control section is for sending commands directly to the EF lens mount.
IO Industries Inc.
Revision 3.0
Figure 17. Lens view
