IOGear Q1376, Быстрый старт

Страница: 6 / 30

or
1
1. To power on the NetShair Nano,
plug into a USB port on your computer
or to a USB charging adapter of any
mobile device.
2. Download the NetShair Nano App
for your devices from their
respective app store. (App not required
for PC/MAC or other devices with full
HTML browser support).
3. Connect to the
NetShair_Nano_XXXX
Wi-Fi network.
Note: XXXX= Last 4
digits of the NetShair Nano’s MAC ID.
Hardware Installation
Do not connect the Ethernet cable until app/client setup
is complete!
USB wall charger not included
iPod / iPhone / iPad................................................... page 7
Android ...................................................................... page 13
Computer / Other ...................................................... page 19
Software Setup:
Which device do you
have?
fee for each device connected, use Router Mode to share a single
IP address between your connected devices. Using AP mode on
these networks would require each device to have a separate IP
address, likely causing an access charge for each one.