IOGear Q1376, Быстрый старт

Страница: 10 / 30

10
1. Make sure the NetShair_Nano_XXXX Wi-Fi Network
is connected.
2. After setting the NetShair Nano in Router Mode (see Router
Mode Setting), tap on
Advance Setting
and then select
Set WAN Interface
.
3. Select
PPPoE
from the menu and enter
username and password.
4. Tap
OK
, then
Restart
when
prompted. Wait approximately 60
seconds for the NetShair Nano to restart.
5. Once restarted, connect Ethernet cable
to Netshair Nano.
6. Connect back to NetShair_Nano_XXXX Wi-Fi Network.
Open your web browser to access the internet.
Router Mode: PPPoE
NetShair Nano comes preset for DHCP Mode which is the
standard mode for cable internet providers. When using NetShair
Nano with a DSL Modem please follow the steps below: