24
Buzzer Control
The buzzer can be turned on or off. To turn the buzzer on/off, do the following:
1. Invoke HSM (see page 22).
2. Press and release
[B]
.
Hotkey Port Switching
To enable/disable hotkey port switching, do the following:
1. Invoke HSM (see page 22).
2. Press
[X] [Enter]
.
When disabled, port switching hotkeys
[Scroll Lock] [Scroll Lock]
(and the
alternative
[Ctrl] [Ctrl]
) will not work.
Firmware Upgrade Mode
To enter Firmware Upgrade Mode, do the following:
1. Invoke HSM (see page 22).
2. Key in: upgrade
3. Press
[Enter]
.
The front panel LEDs flash to indicate Firmware Upgrade Mode is in effect.
Note: To exit Firmware Upgrade Mode, you must power off the switch.
Restore Default Settings
To reset the GCS1953 to its default Hotkey settings, do the following:
1. Invoke HSM (see page 22).
2. Press
[R] [Enter]
.
All Hotkey settings return to the factory default settings.
Power on Detection
With Power on Detection, if the focus computer is powered off, the switch will automatically
switch to the next powered-on computer. Power on Detection can be enabled or disabled.
The default setting is enabled. To enable/disable Power on Detection, do the following:
1. Invoke HSM (see page 22).
2. Press
[E]
.
