13
2
Port
Selection
Pushbuttons
For manual port selection (see Manual Switching, page 17):
• Press a switch for less than two seconds to bring the KVM,
USB hub, and audio focus to the computer attached to its
correspond- ing port.
• Press a port selection pushbutton for longer than two
seconds to only bring the KVM focus to the computer
attached to its corre- sponding port.
• Press a port selection pushbutton twice to bring the audio
focus to the computer attached to its corresponding port.
• Press port selection pushbuttons 1 and 3 simultaneously
for 2 seconds to start Auto Scan Mode (see Auto Scanning,
page 21).
• Press port selection pushbuttons 2 and 3 simultaneously for
2 seconds to perform a Keyboard/Mouse reset. (see USB
Reset, page 23).
Buzzer Behavior
Sound
Description
1 beep
• Changing port
• Activating auto-scan mode
• Pausing/resuming auto-scan
1 long beep
• Powering on the unit
• Resetting the unit
2 beeps
• Interrupting auto-scan
•
Entering keyboard emulation off mode
• Finishing USB synchronization
Refer to Buzzer Control on page 24 if you wish to turn the buzzer on or off.
