23
Keyboard Operating Platform
The GCS1953’s default port configuration is for a PC compatible keyboard operating
platform. If your console uses a PC compatible keyboard and you have a Mac or Sun
attached to a port, for example, you can change the port’s keyboard operating platform
configuration so that the PC compatible keyboard emulates the Mac or Sun keyboard.
The procedure is as follows:
1. Bring the KVM focus to the port you want to set.
2. Invoke HSM (see page 22).
3. Press and release the appropriate Function key (see table below). After completing
this procedure, you automatically exit HSM.
Function Key
Operation
[F1]
Sets the SPC mode so that it can work under special operating
systems as a standard (104 key) keyboard.
[F2]
Enables Mac keyboard emulation, see page 28, for details.
[F3]
Enables Sun keyboard emulation, see page 29, for details.
[F10]
Enables Windows keyboard emulation.
List Switch Settings
To see a listing of the current switch settings, do the following:
1. Open a text editor or word processor and place the cursor in the page window.
2. Invoke HSM (see page 22).
3. Press and release
[F4]
to display the settings.
USB Reset
If the USB loses focus and needs to be reset, do the following:
1. Invoke HSM (see page 22).
2. Press and release
[F5].
Keyboard Language
To change the keyboard language, do the following:
4. Invoke HSM (see page 22).
5. Press and release
[F6] [nn] [Enter]
.
Note:
nn
is a two-digit number that represents the keyboard language code (US
English: 33; French: 08; German: 09).