IOGear GCN1000 PCPortal, Руководство по установке

Страница: 29 / 48

29
Hotkey Setup
If you fi nd a default Hotkey combination inconvenient, you can recon fi gure it by following these fi ve steps:
1. Highlight the Action, and then Click Start.
2. Key in the Function keys (one at a time). The key names appear in the Key
fi eld as you press them.
3. When you have fi nished keying in your sequence, Click Stop.
4. Click Set. Repeat for any other actions you wish to change.
5. Click Close.
Note: You can use the same function keys for more than one action, as long as the fi rst key is not the same.
For example, you can use F1 F2 F3 for one action; F2 F1 F3 for another; F3 F2 F1 for a third, etc.
Various actions related to manipulating the remote server can be accomplished with hotkeys.
The Hotkey Setup utility (accessed by clicking the Keyboard icon on the Control Panel), lets you
con
fi gure which hotkeys perform the actions. The actions are listed in the left panel; the hotkeys
that invoke them are shown in the panel at the right.