For technical assistance call
3
NA / LATAM
// 704.752.6513 • 888.55.INVUE
EMEA
// +31.23.8900150
APAC
// +852.3127.6811
S3100V Sensors & Stand
LIVE Vertical Wireless
Model: VRTWRLSS
Hereby, InVue Security Products, Inc. declares that the radio equipment type VRTWRLSS is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
https://invue.com/product-compliance/
EU Importer:
INVUE SECURITY PRODUCTS B.V.
Saturnusstraat 17 D
2132 HB Hoofddorp
The Netherlands
+31 23.8900150
Manufacturer:
InVue Security Products, Inc.
9201 Baybrook Lane
Charlotte, NC 28277, USA
Maximum output power is 5.2V. Operation is limited to the following channels/bands as supported in the country of use: 863-870MHz, 902-927MHz
Accessories and Software to operate as intended:
Zone Manager 30 (DBD702) and Zone Manager 52 (DBD701) establish wireless display security and has two alarm settings that are activated when a sensor enters an Alarm Zone, or when it exits a Secure Zone. Software version: FW0219_2021-01-05_810_0_x.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
ISED Regulatory Compliance
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Cet équipement est conforme aux limites d’exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé.
