involight A-000000-05908, Руководство пользователя

Страница: 14 / 25

13
3.1 Anschlüsse und Bedienelemente.
Illustration 1.
Front:
1. Control LEDs: green - output channel ready for operation, red - goes out in the event of an error (e.g. short
circuit).
2. DMX output 1 - 8: DMX output with female 3-pin XLR socket for connecting a DMX end device or several DMX
end devices in a chain.
3. Power LED: shows the power supply.
4. Terminator: switchable 120 ohm terminating resistor for the DMX LINK output socket.
5. DMX-LINK-output: Female 3-pin XLR socket for forwarding the DMX signal present at the DMX input to
another DMX splitter / repeater.
6 . DMX input: Male 3-pin XLR socket for connecting a DMX control unit.
7. Power ON/OFF: On / off switch for the power supply of the device.
Illustration 2.
Back:
9. POWER IN:
IEC power input socket with fuse holder for F1A 250V fuse.
The assignment of the connection lines is as follows:
Line Pin International
Brown Outer
conductor
L
Blue Neutral
conductor
N
Yellow-
green
Protective
conductor
The protective conductor must be connected!
DMX connections:
An XLR socket serves as a DMX output, an XLR plug serves as a DMX input.
1.
2.
3. 4.
5
6.
6.
7.
9.