involight A-000000-05906, Руководство пользователя

Страница: 13 / 26

12
Part 2: Installation:
Unpack the unit and carefully check it for damage before using it. Place the unit in a suitable location. Only after
you have made all connections do you connect the unit to a properly wired and earthed socket, which supplies the
mains voltage stated in this manual.
Ensure that the power cord is not pinched or damaged by sharp edges
can. Check the unit and the mains cable regularly for damage.
The cable entry or the coupling on the device must not be loaded by pulling. There must always be a
Sufficient cable length must be available to the device. Otherwise, the cable may be damaged, which can result in
fatal electric shock.
Always plug the mains plug as last. The power plug must be used without violence. Ensure that the power plug is
firmly seated.
NOTE!
Possible errors during data transfer
To ensure trouble-free operation, use special DMX cables and no normal microphone cables.
Part 3: Functions:
This DMX splitter has one input and four outputs. Each channel provides a 3-pin DMX socket for connection, each
DMX output is controlled by an independent bus driver.
3.1 Connections and controls:
Illustration 1:
1.
2.
1. Control LED: Green - output channel ready for
operation.
2. Power LED: Displays the voltage supply.