Invitrogen iBlot 2 Скачать руководство пользователя страница 62

Страница: 62 / 68

The symbols used on the iBlot

™

2 Gel Transfer Device are explained below:

Symbol

Information

The CE mark symbolizes that the product conforms to all applicable

European Community provisions for which this marking is required.

The iBlot

™

2 Gel Transfer Device complies with the TUV Rhineland

North America Inc. safety requirements. The indicators "C" and "US"

means that the product is certified for both the U.S. and Canadian

markets, to the applicable U.S. and Canadian standards.

The Caution symbol denotes a risk of safety hazard. Refer to

accompanying documentation to avoid possible personal injury or

instrument damage.

The WEEE (Waste Electrical and Electronic Equipment) symbol

indicates that this product should not be disposed of in unsorted

municipal waste. Follow local municipal waste ordinances for proper

disposal provisions to reduce the environmental impact of WEEE.

Visit http://www.lifetechnologies.com/weee for collection and

recycling options.

The Electrical Warning symbol denotes a risk of electrical shock

hazards. To avoid risk of injury from electric shock, do not open

enclosures marked with this symbol.

The Caution symbol denotes a risk of safety hazard. Refer to

accompanying documentation to avoid possible personal injury or

instrument damage.

Product catalog number.

Consult instructions for use.

Site of manufacture.

Safety standards

Reference

Description

EN-61010-1:2010 (3rd

Edition)

Safety Requirements for Electrical Equipment for Measurement, Control, and

Laboratory Use – Part 1: General Requirements

Reference

Description

Directive 2004/108/EC

European Union “EMC Directive”

EN 61326-1

Electrical Equipment for Measurement,

Control and Laboratory Use – EMC

Requirements – Part 1: General

Requirements

FCC Part 18 (47 CFR)

U.S. Standard “Industrial, Scientific, and

Medical Equipment”

Symbols on

instrument

EMC

Appendix G

Safety

Safety and electromagnetic compatibility (EMC) standards

iBlot

™

2 Dry Blotting System User Guide

Содержание iBlot 2





































































Результаты поиска

Содержание iBlot 2

Отзывы:

Бренды по названию

Популярные бренды

Invitrogen iBlot 2, Руководство пользователя

Результаты поиска

Содержание iBlot 2

Отзывы:

Бренды по названию

Популярные бренды