- DRAFT -
Rev. 1.0 JAB
2
G:\PCTEST LAB\2006 Reports\TRP\Safe Dog Monitor - Part 68\TCB Documents\KZ3-050808 manual.doc
Need Part Number
Table of Contents
1.0 Product Introduction
1.1 Safe Dog
®
Monitor System Overview
1.2 Important Precautions and Warning
1.3 Required System Components for Installation
1.4 Product Specifications
1.5 Loop Sensor User Control
1.6 Dialer Unit User Control
2.0 Planning the Safe Dog
®
Monitor Installation
2.1 Safe Dog
®
Monitor Loop Sensor
2.2 Safe Dog
®
Monitor Dialer Unit
3.0 Safe Dog
®
Monitor Installation Process
3.1 Programming the Safe Dog
®
Monitor Loop Sensor and Dialer Unit
3.1.1 Programming/Synchronization Procedure
3.2 Safe Dog
®
Monitor Loop Sensor
3.2.1 Installation Diagram
3.2.2 Mounting the Safe Dog
®
Monitor Loop Sensor
3.2.3 Routing the Signal Field Wires
3.2.4 Connecting AC Power
3.2.5 Connecting to the Transmitter Battery Back-up
3.2.6 Calibrating the Signal Field to the Loop Sensor
3.3 Safe Dog
®
Monitor Dialer Unit
3.3.1 Installation Diagram
3.3.2 Connecting Power
3.3.3 Connecting the Phone Line
3.3.4 Successful RF Communication Link
3.3.5 Mounting the Safe Dog
®
Monitor Dialer Unit
3.3.6 Using Battery Back-up
4.0 Normal Operating Mode – Failure Detection
4.1 Dialer Unit and Loop Sensor Communication
4.2 Alert Conditions
4.2.1 Decrease or Absence of Signal Field
4.2.2 Increase in Signal Field
4.2.3 Loss of RF Link with the Loop Sensor
4.3 Alert Notification
4.3.1 Alert Notification Email
4.3.2 Example of Alert Notification Email
4.3.3 Alert Notification Schedule
4.4 LED Status Indicator Lights
5.0 Safe Dog Monitor Registration
