InVid PAR-P2TEMPTABLET, Руководство пользователя

Страница: 30 / 64

25
Temperature Screening & Face Recognition Terminal User Manual
Set the format, resolution and quality of the image saved on the SD card and the snapshot
interval and quantity and the timing snapshot here.
Snapshot Quantity : The number you set here is the maximum quantity of snapshots. The
actual quantity of snapshots may be less than this number. Supposing the occurrence time of
an alarm event is less than the time of capturing pictures, the actual quantity of snapshots is
less than the set quantity of snapshots.
Timing Snapshot : Enable timing snapshot first and then set the snapshot interval and
schedule. The setup steps of schedule are the same as the schedule recording (See Schedule
Recording ).

USB disk
This function is only available for the model with USB interface. In this interface, you can
view the state and capacity of the USB flash disk.
6.2 Image Configuration
6.2.1 Display Configuration
Go to Image

Display interface as shown below. The image’s brightness, contrast, hue and
saturation and so on for common, day and night mode can be set up separately. The image
effect can be quickly seen by switching the configuration file.