inventum AKB9004RGT, Инструкция по эксплуатации

Страница: 24 / 28

24
• English
INSTALLING THE COOKER HOOD TO A DUCT
1 Draw a vertical line on the wall from the middle of the cooker upwards with a minimum height of 65 cm + A.
Mark at this height horizontally the holes for the cooker hood bracket with a distance of exactly 80 mm (=X) of each other.
2 Drill with a masonry drill of Ø8mm the two marked holes.
3
Insert the plugs and fit the cooker hood bracket with the screws to the wall.
4 Hold the bracket for the inner chimney at the desired height on the wall. Mark the holes for the bracket. Drill the markes holes
and insert the plugs.
Fit the bracket for the inner chimney with two screws to the wall.
5 Drill a hole with a diameter of 160 mm in the wall to the outside. Make sure the hole is positioned at least 1 cm below the fitted
bracket and at least 30 cm above the screws to hang the cooker hood on.
6 Place a socket, if necessary, out of sight behind the exhaust-air pipe. The socket must be postioned at least 1 cm below the
fitted bracket and at least 30 cm aboven the cooker hood.
7
Hang the cooker hood onto the cooker hood bracket.
8
10
12
7
9
11
2
* Only when using the starter kit for recirculation