Inventis TRIANGLE, Руководство пользователя, Страница: 21 / 368

13
EN
Swipe the screen to the right to access the parameters:
- Stimulus type: Tone or Warble. Default: Warble.
- Stimulus mode: Continuous or Pulsed 1 Hz. Default: Continuous.
- Default intensity: Sets the default intensity of the stimulus. Default:
40 dB HL.
- Maintain intensity: Maintain the level after changing the frequency.
Default: disabled.
- Interrupter mode: Allows the interrupter key to be used as a button
(stimulation is active when the key is pressed) or switch (the first key
pressure activates the stimulus, the second one deactivates it). Default:
button.
- Automatic frequency jump: Enables/disables automatic frequency jump
after a value is stored. Default: disabled.
- Frequency selection: Access the frequency selection screen to
individually enable/disable the frequencies to be tested. Default value:
all frequencies enabled.
3.3.1
“Bone conduction” license
The following controls and information are available only when the “Bone
conduction” license is enabled:
Icon Operation
Select the transducer
Enable tracking (keep the same difference in dB between
stimulus and masking)
No Response
Frequency not tested