inVENTer iV-Smart Plus Скачать руководство пользователя страница 2

Страница: 2 / 44

iV-Smart+ ventilation device | Installation instructions

Trademarks, copyrights and property rights

inVENTer

, Xenion

, inVENTron

, Inventin and Clust-Air

are registered trademarks of

inVENTer GmbH.

The copyright to this document remains with the manufacturer.

Rights to all content and images: © inVENTer GmbH 2022.

All trademarks used in this document are the property of their respective manufacturers and are

hereby acknowledged.

Disclaimer

This documentation represents a translation of the German installation instructions.

After completion of the installation the information regarding access to these installation instruc-

tions must be handed over to the user (tenant, owner, property management, etc.).

The content of this documentation has been checked for compliance with the described com-

ponents. Nevertheless deviations may still occur, therefore no guarantee of compliance can be

provided.

This documentation describes the functionality of the standard scope.

For reasons of clarity, the documentation does not purport to cover all details on all types of the

product and cannot cover every conceivable scenario for installation and assembly.

The illustrations in this document may differ slightly from the design of the product that you have

purchased. The same functionality is ensured despite any design deviations.

This documentation is updated regularly. Necessary corrections and appropriate supplements are

always included in subsequent editions. You can also find the latest version at

www.inventer.eu/downloads.

Company information

Publisher:

inVENTer GmbH

Phone: +49 (0) 36427 211-0

Ortsstraße 4a

Fax:

+49 (0) 36427 211-113

07751 Löberschütz

E-mail: [email protected]

Germany

Web:

www.inventer.eu

CEO: Annett Wettig

VAT ID number: DE 815494982

Jena District Court HRB 510380

Содержание iV-Smart Plus













































Результаты поиска

Содержание iV-Smart Plus

Отзывы:

Похожие инструкции для iV-Smart Plus

Бренды по названию

Популярные бренды

inVENTer iV-Smart Plus, Руководство по установке

Результаты поиска

Содержание iV-Smart Plus

Отзывы:

Похожие инструкции для iV-Smart Plus

Бренды по названию

Популярные бренды