OPERATION ON AVIANT´S CONTROL PANEL
8
Aviant extractor fan | Operating instructions
3
Operation on Aviant´s control panel
All functions of the extractor fan can be set directly on
the control panel of the fan
.
The function indicator lights up in different
colors depending on the active function:
No indicator light
Continuos ventilation / Off
Blue indicator light
Permanent:
Activated by humidity sensor.
Flashing:
Run-on function activated. High
humidity levels detected.
Green indicator light
Activated by air quality sensor.
Violet indicator light
Automatic basic ventilation cycles
(1 x daily without use)
Yellow or Orange indicator light
Permanent:
Run-on function active
Flashing:
Switch-on delay active, the flashing
becomes faster towards the end of the switch-on
delay.
Red indicator light
Connection error. Touch the Function icon or
start the “inVENTer mobile” application again.
Quick overview
To access the control panel, first
remove the Aviant's magnetic
inner cover.
To access the programmable functions press the following
icon:
All programmable function icons light up:
Run-on timer
Switch-on delay
Humidity
sensor
Continuous
ventilation
Light and
Air quality sensor
To activate the desired function:
Press the icon whose function is to be changed.
Only the selected function icon lights up to indicate what
settings can be changed.
Set the desired parameters for this function by
repeatedly pressing the respective symbol button.
The function selection is terminated by pressing the
icon twice.
If the symbol lights up permanently on the control
panel, the ventilation unit is already paired with a
mobile device and cannot be controlled on the control
panel. First disconnect the Bluetooth connection. The
symbol goes out and operation on the control panel
is possible.
i
