APP “INVENTER MOBILE”
15
Aviant extractor fan | Operating instructions
i
4.3 The Start menu of the App
All settings can be made menu-driven.
Settings:
Change product name and reset
to factory settings.
Quick selection area:
• Quick setting of the boost or pause
time; display of the remaining boost or
pause time.
• Display of the current fan speed.
Settings menus:
• Activate/deactivate functions
(black:
function active/
grey: function not active
).
• Set the setting parameters of the
individual functions:
e.g. sensor sensitivity, air flow volume,
function intervals.
4.4 Menu setting in the app
• During operation with the app, there must be a Blue-
tooth connection between the Aviant and the mobile
device. Note the range.
Air humidity
Current fan power 2006RPM
800 RPM
2400 RPM
Current fan power
Deactivate sensors
Low sensitivity
Medium sensitivity
High sensitivity
By pressing the button, the settings menu of the
selected function opens.
Display
currently set function-parameter
Adjustment range air flow volume
Setting range of other parameters
, varies
depending on the selected function menu:
• Enable/disable the function
• Sensor sensitivity
• Set run-on time, switch-on delay, pause
times, boost times
• The following functions can be set exclusively via app:
- Boost function (maximum air flow volume for
a defined period of time).
- Automatic basic ventilation cycles.
- Pause the Aviant, and
- Set the pause duration.
•
The air flow volumes of the humidity and air quality
sensor are interconnected. Therefore, they cannot be
set independently of each other. If the air flow volume
is changed in one of the two setting menus, an adjust-
ment to the same value is automatically made in the
other. This applies equally to the air flow volume of
the light sensor and run-on time.
•
For certain functions, e.g. run-on time, the app offers
more selection options than operation on the control
panel.
Run-on
Humidity
Permanent operation
Light sensor
Air quality sensor
Basic ventilation
Pause
Aviant
Boost
Pause
0RPM