inVENTer 1001-0213 Скачать руководство пользователя страница 9

Страница: 9 / 55

SYSTEM OVERVIEW

iV-Office ventilation device

•

Installation and operating instructions

System overview

The iV-Office is a decentralised ventilation unit with heat recovery and is designed for increased

air flow requirements (performance-plus device). The iV-Office is suitable for installation in new

buildings as well as for retrofitting in older buildings and is particularly suitable for use in large

living spaces and similar commercial premises (e.g. offices, doctors' surgeries, lounges, etc.).

Installation is generally carried out in the exterior wall.

The ventilation device consists of a wall sleeve in which the thermal accumulator insert is mounted.

A lockable inner cover conceals the iV14-Office discreetly from the interior. The filter integrated

into the inner cover ensures that no pollen or dust from outside enters the interior.

Outside, a driving rain-proof cover conceals the components of the ventilation device.

The sound insulation lining made of Inventin, a material specially developed to reduce noise,

is inserted into the wall sleeve. The insulated wall sleeve incorporates the ceramic thermal

accumulator and inVENTron, two guiding vane elements and the Xenion EFP reversible fan.

The guiding vanes on both sides of the fan serve to straighten the air flow and ensure more

efficient flow through the thermal accumulator. The sound-absorbing Inventin lining and the

unique geometry of the Xenion EFP reversible fan effectively reduce the passage of sound.

The standard length of the wall sleeve is 495 mm. For thicker walls, a wall sleeve and insert

with a length of 745 mm can be ordered as an alternative. Both versions can be shortened on site.

The ventilation device is controlled via one of the following inVENTer system controllers

• sMove

• MZ-Home

Components

•

Inner cover incl. dust filter class G4

• Thermal accumulator insert

(Thermal accumulator, inVENTron

and sound insulation lining made

of Inventin)

• Wall sleeve

• Exterior closure

•

Pollen / activated carbon filter (optional)

• Sound and wind protection accessories

(optional)

Models

iV-Office ventilation device with Flex driving rain-proof weather protection hood (white/grey/

north/anthracite/custom colour).

The installation and operating instructions for the controllers are not part of this documentation and are enclosed separately.

Содержание 1001-0213
























































Результаты поиска

Содержание 1001-0213

Отзывы:

Похожие инструкции для 1001-0213

Бренды по названию

Популярные бренды

inVENTer 1001-0213, Инструкция по установке и эксплуатации

Результаты поиска

Содержание 1001-0213

Отзывы:

Похожие инструкции для 1001-0213

Бренды по названию

Популярные бренды