User’s Manual
XC-RF850 Reader
33
3.3.3 Reader configuration
To configure the reader, click on the reader configuration button, and a dialog
box will pop up. Set up the reader’s IP address, baud rate and related information
configuration of RFID, as shown in the figure be
low:
Figure 3-14
After completing configuration, click on “Config” to save the configuration.
Click on “Query” to inquire about the current configuration of all connected
readers.
Reader address-1: Refers to the configured network parameters based on actual
needs (connecting reader in the same network segment)
Baud rate-2: Refers to the configured serial communication baud rate based on
actual needs.
RF port power-3: Refers to the configured RF port power based on actual needs.
Normally, the larger the power, the longer is the reading range.
Reading mode: SingleTag, suitable for the quick reading of single tag, in the case
of one tag within a RF antenna field; MultiTag, suitable for the simultaneous
reading of multiple tags within a field of RF antenna field
Smart hibernation mode: The reader will enter into hibernation after being
idle for a period of time. The hibernation duration refers to the idle time in the
configuration. Otherwise, click on “Cancel” if no such configuration is needed.
3 DEMO user guide
