SECTION 2—SAFETY/HANDLING OF WHEELCHAIRS
Tracer® EX2
14
Part No. 1110546
FIGURE 2.7
Unfolding
Folding Wheelchair
NOTE:
For
this
procedure,
refer
to
FIGURE 2.8.
1.
Swing
footrest/legrest
in
locked
position
to
the
front
of
the
wheelchair.
2.
Pivot
footplates
upward
to
vertical
position.
3.
With
both
hands,
grasp
the
middle
of
the
seat
upholstery
at
the
front
and
back
edge
and
lift
up.
CAUTION
DO NOT allow upholstery to hang between
the cross braces.
4.
Place
excess
seat
upholstery
over
the
armrest.
FIGURE 2.8
Folding Wheelchair
Folding Hammock or Sling Seat Models.
NOTE:
For
this
procedure,
refer
to
FIGURE 2.9.
1.
Swing
footrest/legrest
and
calfpads
in
locked
position
to
the
front
of
the
wheelchair.
2.
Pivot
footplates
upward
to
vertical
position.
3.
With
both
hands,
grasp
the
middle
of
the
seat
upholstery
at
the
front
and
back
edge
and
lift
up.
4.
Continue
to
close
the
wheelchair
by
grasping
the
armrest
furthest
from
you
and
pulling
the
armrest
towards
you.
FIGURE 2.9
Folding Hammock or Sling Seat Models.
Seat Rail
NOTE:
DO
NOT
wrap
thumb
or
fingers
under
the
seat
rail.
Point
fingers
and
thumb
to
the
inside
of
the
wheelchair.
NOTE:
Press
down
on
the
seat
rail
and
the
seat
upholstery
with
the
entire
hand.
DO
NOT
place
any
part
of
the
hand
under
the
seat
rail.
H-Blocks
