Invacare Top End T-3 Tennis Adjustable Скачать руководство пользователя | Manualshive

Страница: 44 / 64

background image

T-3™ and T-4™ Series

44

Part No. 1054916

FIGURE 14 - ADJUSTING WHEELBASE WIDTH

A-4 CAMBER TUBE

CAMBER TUBE 2000

Axle Bolt

Axle Nut

NOTE: Axle bolt removed from axle tube for clarity.
It is not necessary to remove the axle bolt for this
procedure.

Threads

Indexing Marks

Axle Tube

Camber Insert

Indexing Ring

Frame Bracket

ADJUSTING WHEELBASE WIDTH (FIGURE 14)

ADJUSTING WHEELBASE WIDTH - A-4 CAMBER TUBE

NOTE: Perform this procedure one (1) side of the wheelchair at a time for ease of adjustment.

1. Open the camber clamps. Refer to OPENING/CLOSING CLAMPS in this procedure of the

manual.

WARNING

NEVER position the camber inserts in the axle tube with more than 3-inches
(12 indexing marks showing) of the camber insert outside of the axle tube. The
camber inserts will not be securely tightened in the axle tube resulting in
possible injury to the user or damage to the wheelchair.

2. Position the camber insert to the desired position. Make sure there is no more than 3-inches

(12 indexing marks showing) of the camber inserts outside of the axle tube.

3. Slide the indexing ring on the camber insert until it is flush with the frame bracket.

NOTE: Before using the wheelchair, make sure both camber inserts are set at the same indexing mark.
This will make sure the distance between the rear wheel and the wheelchair is the same on both sides.

WARNING

QUICK RELEASE LEVERS - Make sure the quick release levers are pointing
towards the rear of the wheelchair and is in the CLOSED position BEFORE
using the wheelchair, otherwise personal injury or damage to the wheelchair
may result.
STANDARD - Make sure the hex screws and locknuts are securely tightened
BEFORE using the wheelchair, otherwise personal injury or damage to the
wheelchair may result.

4. Close the camber clamps. Refer to OPENING/CLOSING CLAMPS in this procedure of the

manual.

5. Repeat STEPS 1-4

for the opposite side of the wheelchair.

WHEELS

PROCEDURE 6

WHEELS

WHEELS

«
...
42
43
44
45
46
...
»

Содержание Top End T-3 Tennis Adjustable

































































Отзывы:

Нет отзывов

Похожие инструкции для Top End T-3 Tennis Adjustable

Quickie S-646 SE

Бренд: Quickie Страницы: 42

Бренд: progeo Страницы: 48

Бренд: Motion Composites Страницы: 32

My Bath Seat 19490

Бренд: Summer Страницы: 8

Бренд: Meyra Страницы: 52

Бренд: Meyra Страницы: 44

Бренд: FreeWheel Страницы: 2

Geo-Matrix Silverback

Бренд: Blake Medical Страницы: 3

Бренд: Power Plus Mobility Страницы: 6

Бренд: HMN Страницы: 5

Бренд: Innovate Страницы: 18

Бренд: Repose Страницы: 2

Sopur Ti Titanium

Бренд: Quickie Страницы: 216

Бренд: Jay Страницы: 8

Nitrum Caster Fork Angle

Бренд: Quickie Страницы: 2

Бренд: BraunAbility Страницы: 26

Бренд: Strongback Mobility Страницы: 28

Бренд: Colours Страницы: 23

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды