Invacare Top End T-3 Tennis Adjustable Скачать руководство пользователя | Manualshive

Страница: 21 / 64

background image

Part No. 1054916

21

T-3™ and T-4™ Series

MAINTENANCE

MAINTENANCE SAFETY PRECAUTIONS

WARNING

After making adjustments, always make sure that parts are properly tightened
BEFORE using the wheelchair.

CAUTION

DO NOT overtighten hardware attaching to the frame. This could cause
damage to the frame tubing.

SUGGESTED MAINTENANCE PROCEDURES

1. Before using your Invacare Top End wheelchair, make sure all nuts and bolts are tight.

Check all parts for damage or wear and replace. Check all parts for proper adjustment.

2. Keep quick/quad-release axles free of dirt and lint to ensure positive locking and proper

operation. Refer to ADJUSTING QUICK-RELEASE AXLES or

INSTALLING/ADJUSTING

QUAD-RELEASE AXLES in PROCEDURE 6 of this manual.

WARNING

DO NOT use WD-40

®

, 3-in-1 oil

®

, or other penetrating lubricants on quick-

release axles or camber inserts. Otherwise, binding and/or damage to the
wheelchair may occur.

3. Clean quick-release axles and camber inserts once (1) a week with a Teflon

®

lubricant.

WARNING

DO NOT use the wheelchair unless it has the proper tire pressure (p.s.i.). DO
NOT overinflate the tires. Failure to follow these suggestions may cause the
tire to explode and cause bodily harm.

4. Recommended tire pressure is listed on the side wall of the tire.
5. The wheels and tires should be checked periodically for cracks and wear, and should be

replaced by a qualified technician.

6. Regularly check for loose spokes in the rear wheels. If loose, have them adjusted by a

qualified technician.

7. Periodically check handrims to ensure they are secured to the rear wheels. Refer to

HANDRIM REPLACEMENT

in PROCEDURE 6 of this manual.

8. Periodically adjust wheel locks as tires wear. Refer to WHEEL LOCK ADJUSTMENT in

PROCEDURE 6

of this manual.

9. Periodically check caster wheel bearings to make sure they are clean and free from

moisture. Use a Teflon

lubricant if necessary.

10. Check upholstery for sagging, rips or tears.

SAFETY INSPECTION

SAFETY INSPECTION

PROCEDURE 2

«
...
19
20
21
22
23
...
»

Содержание Top End T-3 Tennis Adjustable

































































Отзывы:

Нет отзывов

Похожие инструкции для Top End T-3 Tennis Adjustable

Бренд: Excel Страницы: 45

The World's Best Laterals

Бренд: Stealth Products Страницы: 16

Бренд: Drive DeVilbiss Страницы: 2

Сustom AccuSoft Cushion

Бренд: Ride Страницы: 6

Бренд: Ride Страницы: 7

Бренд: Ride Страницы: 8

HD motion Series

Бренд: HD Rehab Страницы: 24

Бренд: Quickie Страницы: 44

Бренд: Ti Lite Страницы: 147

Бренд: Astris PME Страницы: 14

Бренд: HD Страницы: 2

Бренд: Jay Страницы: 2

Бренд: EZee Life Страницы: 27

Бренд: DJMed Страницы: 4

Бренд: Karma Страницы: 48

Бренд: Unicare Health Страницы: 36

Бренд: Quickie Страницы: 32

Бренд: Safer Locks Страницы: 21

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды