Invacare Top End T-3 Tennis Adjustable Скачать руководство пользователя | Manualshive

Страница: 12 / 64

background image

T-3™ and T-4™ Series

12

Part No. 1054916

GENERAL WARNINGS (CONTINUTED)

ALWAYS wear your seat positioning strap. Inasmuch as the SEAT POSI-
TIONING STRAP is an option on this wheelchair (You may order with or
without the seat positioning strap), Invacare Top End strongly recommends
ordering the seat positioning strap as an additional safeguard for the wheel-
chair user.

]

The seat positioning strap is a positioning belt only. It is not designed for use
as a safety device withstanding high stress loads such as auto or aircraft safety
belts. If signs of wear appear, belt MUST be replaced immediately.
ALWAYS use the handrims for self-propulsion. Inasmuch as the HANDRIMS
are an option on this wheelchair (you may order with or without the
handrims), Invacare strongly recommends ordering the handrims as an addi-
tional safeguard for the wheelchair user.

TIRE PRESSURE

DO NOT use your wheelchair unless it has the proper tire pressure (p.s.i.).
DO NOT overinflate the tires. Failure to follow these suggestions may cause
the tire to explode and cause bodily harm.
Replacement of the tire or tube MUST be performed by a qualified techni-
cian.

WEIGHT TRAINING

Invacare Top End DOES NOT recommend the use of its wheelchairs as a
weight training apparatus. Invacare Top End wheelchairs have NOT been
designed or tested as a seat for any kind of weight training. If occupant uses
said wheelchair as a weight training apparatus, Invacare Top End shall NOT
be liable for bodily injury and the warranty will be voided immediately.

WEIGHT LIMITATION

The Invacare Top End T-3 Tennis Adjustable, T-3 Tennis Elite, T-3 Titanium,
the T-4 Tennis Elite and T-4 Titanium wheelchairs have a weight limitation of
250 lbs The. T-4 wheelchair has a weight limitation of 250 lbs.

GENERAL GUIDELINES

PROCEDURE 1

GENERAL GUIDELINES

«
...
10
11
12
13
14
...
»

Содержание Top End T-3 Tennis Adjustable

































































Отзывы:

Нет отзывов

Похожие инструкции для Top End T-3 Tennis Adjustable

Бренд: Karma Страницы: 44

Бренд: PDG Mobility Страницы: 38

Бренд: Quickie Страницы: 64

Бренд: Quantum Страницы: 20

Бренд: Quantum Rehab Страницы: 59

Бренд: Quantum Страницы: 48

Бренд: Sunrise Medical Страницы: 44

Бренд: B+B Страницы: 61

Бренд: Royale Страницы: 3

Бренд: Spencer Страницы: 12

Бренд: M. Bartels Страницы: 36

Бренд: Permobil Страницы: 110

Бренд: Karman Страницы: 35

Бренд: Handicare Страницы: 110

Configura Advance Chair

Бренд: Accora Страницы: 24

Solstice Comfort

Бренд: Days Страницы: 144

Бренд: Eclipse Страницы: 25

Бренд: Quantum Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды