Invacare® TDX® SP2 Series
9.6 Removing/Installing the Shrouds
CAUTION!
– Place the wheelchair in a well ventilated area
where work can be performed without risking
damage to carpeting or floor covering.
Fig. 9-1 Removing/Installing the
Rear Shroud
Fig. 9-2 Removing/Installing the
Front Shroud
Fig. 9-3 Hooks on the Wheelchair
Frame
Fig. 9-4 Front Shroud Detail
9.6.1 Removing the Rear Shroud
1.
Verify the joystick On/Off switch is in the Off position.
2.
Remove the knob screw
A
that secures the rear shroud
B
to the base frame
C
.
3.
Remove the rear shroud from the base frame.
9.6.2 Installing the Rear Shroud
1.
Install the rear shroud
B
and secure in place with knob
screw
A
.
9.6.3 Removing/Installing the Front Shroud/Battery
Retention Bracket
Removing
The front shroud/battery retention bracket
C
is removed
from and installed onto the wheelchair frame
D
as a single
unit.
Front shroud/battery retention bracket
C
mounts on hooks
E
located on the wheelchair frame
D
.
Have the following tools available: 1/4 inch Allen
Wrench, 7/16 inch Box Wrench.
1.
Remove the mounting screws
F
securing the front
shroud/battery retention bracket to the wheelchair
frame
D
.
2.
Lift up to unhook the front shroud/battery retention
bracket from the base frame and remove.
Installing
70
60101831-A
Содержание TDXSP2
Страница 72: ...Invacare TDX SP2 Series psi bar 38 2 6 39 2 7 41 2 8 44 3 0 72 60101831 A ...
Страница 86: ...Notes ...
Страница 87: ...Notes ...