Setup
5 Setup
5.1 Setup/Delivery Inspection
Setup/delivery inspection should be performed by
provider at time of delivery/set up.
Initial adjustments should be made to suit your
personal body structure needs and preference.
Thereafter weekly, monthly and periodic inspections
should be performed by user/attendant between
the six month service inspections. Refer to
9
Maintenance, page 65
.
q
Check all parts for shipping damage. In case of damage,
DO NOT use.
q
Ensure wheelchair rolls straight (no excessive drag or
pull to one side).
q
Ensure clothing guards are secure.
q
Ensure arms are secure but easy to release and
adjustment levers engage properly.
q
Ensure adjustable height arms operate and lock securely.
q
Ensure axle nut or bolt and wheel mounting nuts are
secure on drive wheels.
q
Ensure caster/anti-tipper wheels are free of debris,
and all mounting hardware is secure and not
damaged/missing.
q
Check that cables are routed and secured properly
to ensure that cables do NOT become entangled and
damaged during normal operation of seating system.
q
Ensure proper operation of powered functions
(Example: drive, seating and legrests).
5.2 Adjusting Joystick Mount
Adjusting the Height of the Joystick Mount
You can adjust the height of the nucleus midline holder in
two ways:
•
Adjust it together with the armrest height. Refer to the
user manual for the seating system.
•
Adjust the height of the nucleus midline holder only.
Refer to section below.
•
3/16” (4.8 mm) Allen key
Fig. 5-1
1.
Loosen screw
A
.
2.
Adjust nucleus to desired height.
3.
Tighten screw.
Adjusting the Depth of the Joystick Mount
Fig. 5-2
60101831-A
39
Содержание TDXSP2
Страница 72: ...Invacare TDX SP2 Series psi bar 38 2 6 39 2 7 41 2 8 44 3 0 72 60101831 A ...
Страница 86: ...Notes ...
Страница 87: ...Notes ...