Invacare TDXSP2, Руководство пользователя

Страница: 62 / 88

Invacare® TDX® SP2 Series
Fig. 8-5 Base Tie-Down Points—All Wheelchairs
Fig. 8-6 Seat Tie-Down Points—Wheelchairs with Elevate
1. Secure the mobility device with the tie-down system
belts at the following locations:
a. All Wheelchairs — four tie down points
A
on the
wheelchair base (two at the front and two at the
rear).
b. Systems with Elevate (TRRO-E) — two additional tie
down points B on either side of the seat at the
front of the seat rails.
2. Secure the mobility device by tensioning the belts in
accordance with the tie-down system manufacturer's
user manual.
8.5.2 How The User is Secured Within the Mobility Device
CAUTION!
Risk of injury if the user is not properly secured
within the mobility device
– Even if the mobility device is equipped with a
posture belt, this is no substitute for a proper
safety belt which complies with ISO 10542 in
the transport vehicle. Always use the safety
belt installed in the transport vehicle.
– Safety belts must be in contact with the user's
body. They must not be held at a distance from
the user's body using parts of the mobility
device such as armrests or wheels.
– Safety belts must be pulled as tightly as
possible without causing the user discomfort.
– Safety belts must not be positioned while
twisted.
– Ensure that the third seat belt anchorage point
is not fixed directly to the vehicle floor, but to
one of the vehicle uprights.
62 60101831-A