Invacare® TDX® SP
•
Follow this procedure for moving the wheelchair between floors
when an elevator is NOT available:
1.
If stairway or escalator is only means of access, remove
occupant of wheelchair and transport user and wheelchair
separately.
2.
Invacare recommends using two assistants and making
thorough preparations prior to transportation.
3.
Ensure that only secure, non-detachable parts are used for
hand-hold supports.
4.
Use safe lifting techniques.
5.
Remove the batteries from wheelchair. Refer to 8.11.1
Removing the Batteries from the Wheelchair, page 65.
6.
Using non-removable (non-detachable) parts of the
wheelchair, lift the wheelchair off of the ground and transfer
the wheelchair up or down the stairs.
7.
The wheelchair should not be lowered until the last stair
has been negotiated and the wheelchair has been carried
away from the stairway.
1.6.3
Repair and Service Information — Dealers
and/or Qualified Technicians
WARNING!
Risk of Injury, Damage or Death
Improper setup, service, adjustment or programming
may cause injury, damage or death.
–
Qualified technician MUST setup, service and program
the wheelchair.
–
DO NOT allow non-qualified individuals to perform
any work or adjustments on the wheelchair.
–
DO NOT setup or service the wheelchair while
occupied except for programming or unless otherwise
noted.
–
Turn off power BEFORE adjusting or servicing the
wheelchair. Note that some safety features will be
disabled.
–
Ensure all hardware is securely tightened after setup,
service or adjustments.
–
Warranty is void if non-qualified individuals perform
any work on this product.
12
1143190-N-03
