Orion
9.
Remove glass (1).
10. Replace lightbulbs (2).
11. Install parts in reverse order.
12. Test function.
4.8 Wheels
4.8.1 Replacing wheel suspension
CAUTION!
Risk of accident
Accidental rolling can lead to accidents.
– Secure mobility device against rolling away.
When disassembling, note position of small parts
such as screws and washers. Put small parts down
so that they can be reassembled in right sequence.
•
10 mm wrench
•
12 mm wrench
•
13 mm wrench
•
32 mm wrench
•
Phillips screwdriver
•
Supporting wooden block
1.
Remove seat.
2.
Remove shroud.
3.
Disconnect battery cable
A
.
4.
Remove front steering:
•
3–wheel version
– Dismantle chassis and steering column. See 4.8.5
Replacing steering column, page 22.
•
4–wheel version
– Dismantle steering link and coupling rod. See
4.9.3 Replacing steering link/coupling rod, page
26.
5.
Loosen wheel suspension screw (1).
6.
Loosen screw (2).
7.
Replace wheel suspension.
8.
Install parts in reverse order.
Tighten screw (1) to 25 Nm.
9.
Adjust camber. See 4.9.3 Replacing steering link/coupling
rod, page 26.
10. Test function (trial run).
4.8.2 Replacing shock absorber
CAUTION!
Risk of accident
When parking mobility device on antitippers it is
no longer slowed by motor brake. The mobility
device can roll away out of control.
– Place mobility device rear frame on a supporting
wooden block before you remove wheels.
CAUTION!
Risk of accident
Accidental rolling can lead to accidents.
– Secure the scooter against rolling away.
When disassembling, note position of small parts
such as screws and washers. Put small parts down
so that they can be reassembled in right sequence.
Drive motor needs to be removed before you can
replace left-hand shock absorber. If right-hand shock
absorber is to be replaced, you do not need to
remove drive motor.
•
10 mm wrench
•
17 mm wrench
•
Oblique pliers
•
Rubber hammer
•
Phillips screwdriver
•
5 mm Allen keys (2x)
•
Supporting wooden block
Replacing rear shock absorber
1.
Remove wheel. See user manual.
2.
Remove mud guard. See 4.10.1 Replacing drive unit,
page 27.
20
1608032-A