Orion
1.
Remove seat.
2.
Remove shroud.
3.
Disconnect battery cable
A
.
3-wheel version
1.
Remove direction indicator screw (1).
2.
Disconnect direction indicator cable (2) from wiring
harness.
3.
Replace direction indicator.
4.
Install direction indicators in reverse order.
5.
Test function.
4-wheel version
1.
Remove steering column shroud and steering column.
See 4.8.5 Replacing steering column, page 22.
2.
Remove chassis bolts and fold chassis upwards.
3.
Remove direction indicator screw
A
on chassis.
4.
Disconnect direction indicator cable
B
from wiring
harness.
5.
Remove screws (3) on glass.
6.
Remove glass.
7.
Loosen screws (4) on orange-colored cap (5) and remove
cap.
8.
Replace lightbulb.
9.
Install parts in reverse order.
10. Test function.
4.7.3 Replacing center brake light
CAUTION!
Risk of burning if power cable is shorted
– Turn off the power completely before removing
any power supply components of the mobility
device. Therefore take out the batteries.
– Avoid bridging of contacts during measurements
on live electrical components.
When disassembling, note the position of small parts
such as screws and washers. Put small parts down so
that they can be reassembled in the right sequence.
•
Phillips screwdriver
1.
Remove seat.
2.
Remove shroud.
3.
Disconnect battery cable
A
.
18
1608032-A