5 SAFETY INSPECTION
32
❑
Wheel/fork assembly has proper tension when caster is spun. Caster should come to a gradual stop.
❑
Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
❑
Wheel bearings are clean and free of moisture.
❑
Ensure all caster/wheel/fork/headtube fasteners are secure.
❑
Wheel locks do not interfere with tires when rolling.
❑
Wheel lock pivot point are free of wear and looseness.
❑
Wheel locks are easy to engage.
❑
Inspect tires/casters for flat spots and wear.
❑
Check pneumatic tires for proper inflation (recommended tire pressure is listed on the side wall of the tire).
❑
Clean quick-release axles with a Teflon
®
lubricant.
❑
Ensure axles are free from dirt, lint, etc.
❑
Ensure roller bearings are free from dirt, lint, etc.
❑
Adjust wheel locks as tires wear.
❑
Clean and wax all parts.
❑
Clean upholstery and armrests with mild soap and water.
❑
Ensure casters are free of debris.
❑
Clean upholstery and armrests with mild soap and water.
❑
Check that all labels are present and legible. Replace if necessary.
CAUTION
As with any vehicle, the wheels/casters and tires should be checked periodically for cracks, flat spots and wear, and should
be replaced.
CAUTION
DO NOT use WD-40®, 3-in-1 Oil®, or other penetrating lubricants on quick-release axles. Otherwise, binding and/or
damage to the wheelchair may occur.
