SECTION 7—SEAT AND ARMS
Part No. 1145807
27
Lynx™L-3X
SECTION 7—SEAT AND ARMS
WARNING
After any adjustments, repair or service and before use, make sure that all attaching
hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustment or service, turn power off and
remove key from ignition.
NOTE:
Refer
to
Label
Locations
on
page 7
for
pinch
point
location.
Removing/Installing the Seat
WARNING
Before use, ensure that the seat is in the locked position. The seat lever MUST be
pulled up to the 90° position to allow the seat to drop into the locked position. Oth-
erwise, a fall from the scooter could occur causing bodily injury and/or damage to
the scooter.
NOTE:
For
this
procedure,
refer
to
FIGURE 7.1.
NOTE:
Seat
lock
lever
located
on
left
side
of
seat.
Removing
1. Fold
down
seat
back.
2. Pull
up
the
seat
lock
lever.
3. Lift
the
seat
assembly
up
and
away
from
the
seat
post.
Installing
1. Lower
the
seat
assembly
onto
the
seat
post.
2. Pull
the
seat
lock
lever
up
to
allow
the
seat
to
drop
into
the
locked
position.
3. Lift
up
on
seat
assembly
to
ensure
the
seat
is
secure.
FIGURE 7.1
Removing/Installing the Seat
Seat Lock Lever
Seat
Assembly
Seat Post
