VENTURE
®
HOMEFILL II COMPRESSOR
12
FIGURE 4 -REMOVING THE CYLINDER
Outer Ring
Cylinder
➞
Fillport Connector
Power Switch
REMOVING THE CYLINDER (FIGURE 4)
WARNING
DO NOT modify ANY connections on the HomeFill II compressor. NEVER use
tools of any kind to connect/disconnect the cylinder and the compressor. Otherwise,
severe injury and/or damage may occur.
NOTE: Refer to the GENERAL WARNINGS and the HANDLING WARNINGS in PROCEDURE 1 of this
manual.
1. Press the compressor power switch to the OFF position.
2. Grasp the outer ring of the fillport connector and PUSH DOWN.
3. Lift up on the cylinder to remove from the fillport connector.
4. Perform one (1) of the following steps:
A. If desired, fill another cylinder. Refer to the COMPRESSOR OPERATION CHECKLIST
in this instruction sheet.
B. Place the fillport connector cover onto the fillport connector.
NOTE: The fillport connector cover should be used whenever cylinders are not being filled.
COMPRESSOR OPERATION
PROCEDURE 3
NOTE: Fillport connector cover not shown for clarity.
COMPRESSOR
OPERATION
All manuals and user guides at all-guides.com
