Invacare Dragon Vertic, Руководство пользователя

Страница: 91 / 99

91
Repair the flat tyre.
• Remove the valve cap.
•
Let the air out of the tyre by pressing the pin in the centre of
the valve in.
•
Remove the 5 cylinder head screws (back of the wheel, 2).
• Remove the rim halves from the tyre.
•
Remove the inner tube from the tyre.
•
Repair the inner tube and re-fit, or replace it with a new one.
NOTE
In case the old inner tube is to be repaired and used again, and it happens to get wet during
repair, then it is easier to re-fit it if you powder it lightly with talcum powder.
•
Re-fit the rim halves back into the tyre.
•
Pump up the tyre a little.
•
Re-position the cylinder head screws in the rim and tighten them firmly.
• Check to make sure that the tyre is squarely in place on the rim.
•
Pump up the tyre to the recommended tyre pressure.
•
Check to make sure that the tyre is still squarely and snugly in place on the rim.
•
Screw the valve cap back on.
• Refit the wheel.