Invacare Dahlia 45 Скачать руководство пользователя страница 20

Страница: 20 / 36

Dahlia®30 / 45

The standard position for the high rearwheel attachment

and the

low rearwheel attachment

is in the most outer position. This is the

position of the rearwheel when receiving the product.

3.10.2

Turning the rearwheel attachment

Loosen and remove the attachment screws

and remove the

rearwheel attachment

Turn the rearwheel attachment around.

Remount the rearwheel attachment

on the same side and

re-tighten the screws

(18–24 Nm). Repeat the procedure on

the opposite side.

When turning the rearwheel attachment, you can mount it either in
position

or position

. Position

gives a lower seat height and

position

gives a higher seat height.

See section: “Seat height tables” for more information about position
of the rearwheel attachment and seat heights.

3.10.3

Rearwheel attachment mounted on the

opposite side

The rearwheel attachment can also switch sides in order to give
more adjustment possibilities. By doing this, the seat height and the
placement of the rearwheels can be changed even more.

See section: “Turning the rearwheel attachment” for instructions
about how to demount and remount the rearwheel attachment.

Remount the rearwheel attachment on the opposite side
instead of on the same side.

3.10.4

Rearwheel attachment turned — opposite

sides

When the rearwheel is mounted on the opposide side compared to
the standard position, it can also be turned to give further adjustment
possibilities.

See section: “Turning the rearwheel attachment” for instructions
about how to demount and remount the rearwheel attachment.

First position

, gives a lower seat height and the second position

gives a higher seat height.

See section: “Seat height tables” for more information about position
of the rearwheel attachment and seat heights.

3.10.5

Rear wheel attachment — depth adjustment

WARNING!
Risk of tipping

When the rear wheel attachment is moved forward the
centre of gravity will change. The risk of tipping increases
the more the chair is tilted.

–

Be careful when tilting the wheelchair if the rear wheel

attachment is moved forward.

1572308-B

Содержание Dahlia 45





































Результаты поиска

Содержание Dahlia 45

Отзывы:

Похожие инструкции для Dahlia 45

Бренды по названию

Популярные бренды

Invacare Dahlia 45, Руководство по обслуживанию

Результаты поиска

Содержание Dahlia 45

Отзывы:

Похожие инструкции для Dahlia 45

Бренды по названию

Популярные бренды