Dahlia®30 / 45
2.11
Repositioning the backrest joint
The width extension spacers can be used when there is need
for a wider backrest bar. The spacers will add an extra 25
mm space on each side.
A
B
C
1.
Loosen the three screws
A
on the outside of the seat frame.
Tools: 5 mm allen key
2.
Insert the plastic spacers
B
between the backrest attachment
C
and the seat frame.
3.
Retighten the three screws
A
(10 Nm).
4.
Repeat the procedure on the opposite side.
2.12
Mounting the legrest attachment for
high position
With the high position legrest attachment, the fixation of the
legrest will be 5 cm higher.
The high position legrest attachment is recommended for
users with a height of 185 cm and taller.
1.
A
B
C
Remove the upper screw
A
and the lower screw and washer
B
.
Remove the ordinary legrest attachment
C
.
Tools: Screwdriver (PH 2) for screw
A
, allen key 5 mm for
screw
B
.
2.
D
B
A
Mount the high legrest attachment
D
in the seat frame. Re-insert
the upper screw
A
and the lower screw and washer
B
.
Re-tighten the screws.
Tools: Screwdriver (PH 2) for screw
A
, allen key 5 mm for
screw
B
.
2.13
Mounting the accessory tray
1.
X
A
B
Loosen the screws
B
of the accessory tray
A
and adjust the
width.
2.
X
A
C
Mount the accessory tray
A
on the chassis, the hooks
C
should
be placed on the frame.
3.
4x
E
D
Secure the accessory tray with the attachment straps
D
. Thread
the straps through the slot
E
and wrap them around the hooks.
Secure the attachment straps firmly.
4.
B
Re-tighten the screws
B
to fixate the width.
The accessory tray will be instable
–
Always secure the tray with all four attachment straps.
10
1572308-B
