1.
Switch off the controls.
2.
Press and hold both direction indicator keys.
3.
Switch on the controls.
4.
Wait two seconds until the appropriate flash code displays on
the battery charge display, then release the keys. Do not hold
the keystroke combination down for more than five seconds.
5.
If LED 7 flashes five times subsequently, the acoustic signal has
been successfully activated or deactivated.
6.
The controls return to normal operating status automatically.
LCD display
If your scooter is fitted with an LCD display, you can either activate,
deactivate or change the volume of the acoustic signals.
1.
Switch off the controls.
2.
Press and hold both direction indicator keys
A
and
B
.
3.
Switch on the controls.
4.
The Buzzer Volume setup page illuminates after two seconds.
a.
Press the indicator keys
A
or
B
for the buzzer selection.
b.
Press Lighting key
C
for decreasing the volume.
c.
Press Low speed key
D
for increasing the volume.
d.
Press Setting mode key
E
for saving and enter the next
setup page.
1603455-A
39
Содержание Comet Series ALPINE Plus
Страница 31: ...Accessories Change the front side shroud Change the rear side shroud 1603455 A 31...
Страница 61: ...Notes...
Страница 62: ...Notes...
Страница 63: ...Notes...
