Invacare Bora Series Скачать руководство пользователя

Страница: 71 / 128

Setup

Use the Allen key to loosen both set screws on the foot
plate.

Adjust to the desired angle.

Re-tighten the screws.

5.17.9 Adjusting the angle– and depth–adjustable foot

plate

•

5 mm Allen key

Use the Allen key to loosen the set screw on the foot
plate (1).

Adjust the foot plate to the desired angle or depth.

Re-tighten the screw.

5.18 Powered elevating legrests (ADE legrests)

5.18.1 Swivelling the legrest outward and/or removing

The small unlocking button is located on the upper section
of the legrest. When the legrest is unlocked, it can be
swivelled inward or outward when getting into wheelchair
as well as being removed completely.

Press the unlocking button (1) and swivel the legrest
outward.

Remove the legrest in an upward direction.

5.18.2 Setting the angle

CAUTION!
Risk of crushing

– Do not reach inside the swivelling range of the

legrest.

1528224-Y

Содержание Bora Series

































































































































Результаты поиска

Содержание Bora Series

Отзывы:

Похожие инструкции для Bora Series

Бренды по названию

Популярные бренды

Invacare Bora Series, Руководство пользователя

Результаты поиска

Содержание Bora Series

Отзывы:

Похожие инструкции для Bora Series

Бренды по названию

Популярные бренды